FIRE DETECTION

A wide range of detectors, bases, periherals which are suitable for the addressable fire detection control.

FIRE DETECTION SET

This set contain all the devices required for installing a small fire detection system in limited areas (small shops, houses). The BS-619 set contains:

One BS-632 conventional fire detection panel.

One A-986 battery for the panel.

One BS-655 smoke detector

One BS-660 heat of rise detector.

One BS-536 manual call point

One BS-531 siren with beacon.

AUTONOMOUS FIRE DETECTION PERIPHERALS

BS-525, water-proof siren for fire detection panels. it produces a 100dB/m sound pressure level and can operate with 12 to 24 VDC. To connect the siren to the panel, 2 cable are required. it also has two power supply inputs which produce different sounds.

BS-531, siren for fire detection control panels. it produces a sound pressure level of 100dB/m. it can operate with a voltage of 24 - 30 VDC and 2 c ables are required for connecting the siren to the panel.

BEAM SMOKE DETECTORS

BS-200. 10-100 Meter beam smoke detector. Consist of trasmitter, a receiver and an interface unit that is used for adjustment and connection purposes.

The transmitter produces an infrared beam which passes the monitored area is detected by the receiver. the receiver sends to the interface data that is respective to the quantitty of the received beam.

BS-250 55-50 Meter beam smoke detector. Consist of 2 pieces. One piece contains an IR transmitter, receiver and a connection-control unit The second piece is a special mirror which is mounted directly opposite from the main detector.

The trasmitter produces an infrared beam which passes the monitored area and is reflected back to the receiver.

DIGIT FIRE

An independent unit system is a new idea in the fire detection systems field.

A group of 6 different units that can be interconnected and combined in various ways, to realize fire detection systems from 16 to 64 zones with capabilities of controlling fire extingushing units, electro-valves, electromagnetic door latches and all special devices, that are required even in the most complex systems.

The programming and monitoring of all the units can be done using a small control unit (BS-114), that is the only unit required to be the control area.